Rifle Services

Barrel Work

All barrel work is performed through the headstock with bore dialed straight and true within .0001-.0002. I indicate the bore, pre-drill the chamber, then finish dialing directly off the bore where the throat will be for ideal throat/bore/bullet alignment.

  • Chamber barrel: $400

    • Includes: Barrel evaluation, threading, timing, chambering, crowning, and standard gloss finish

      • Customer supplied reamers accepted

      • For uncommon calibers reamer rental charges may apply

5R 284 Shehane throat

Additional Services:

  • Thread muzzle for brake or tuner: $120

  • Pin & Weld muzzle device: $75

  • Custom Seating Dies- Cut with same reamer as chamber for ideal alignment: $175

  • Additional services available call to discuss.

Accuracy Package

This option is ideal for factory rifles that have accuracy issues or to complement a re-barreling. This package includes a complete evaluation of the factory action and barrel including slugging the barrel to check for bore diameter inconsistencies. Services performed in this package are:

  • Clean, Borescope, slug, & headspace check Barrel

  • Pillar & epoxy bed stock

  • Square & Lap Bolt Lugs to receiver

  • Square Bolt Face

  • Mount Optic & Lap scope rings

    Package: $400.00

    Additions:

  • +$225.00- Sleeve bolt for reduced bolt clearance (.004-.006)

  • +$100.00- Epoxy Sleeve receiver for reduced bolt clearance (.004-.006)

  • Recommend installing aftermarket trigger at this time- price depends on trigger, will install at no cost with this package

Action Work

Action Blueprinting should be considered to correct major factory issues that cannot be addressed by our Accuracy Package.

  • Blue Print Action:

    • $400.00

    • $200.00 if adding to accuracy package

  • Includes: squaring action face, action threads, bolt face, bolt lugs, receiver lugs, lapping bolt and receiver lugs

  • Drill & tap receiver for 8-40 scope mounting screws: $80

  • Scope Mounting and bore sighting: $50

  • After Market Trigger Install: $30.00

  • Zero Scope (Customer supplied ammo): $60.00

Stock Work

Stock work varies greatly depending on what needs to be done- We offer everything from simple pillar bedding to custom hand carved stocks in your choice of wood or laminate combinations. Below is an idea of the work we do- if you are interested in a custom stock, please call.

  • Pillar bed rifle action in stock: $250

  • Epoxy bed action to stock not requiring pillars: $200

  • Open barrel channel for new/ different barrel contour: 75$

  • Inlet & Epoxy bed non-Inletted or semi-inletted stock: $350

  • Install adjustable comb: $200

  • Install recoil pad: $75

  • Install adjustable length of pull or RAD Device: $200

  • Install extra weight in stock: Quote